Miêu Tả Ethernet W5500EVB-M3
W5500-EVB-M3, W5500 Evaluation Board with STM32F103RCT6 + W5500 design, based on the ARM Cortex-M3 platform..
Chức năng sản phẫm Ethernet W5500EVB-M3
Support for hardware TCP/IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
– Supports eight independent ports (Socket) while communication
– Support power-down mode
– Wake on LAN
– Support for high-speed serial peripheral interface (SPI Mode 0,3)
– Internal 32K byte receive buffer
– Built-in 10BaseT / 100BaseTX Ethernet physical layer (PHY)
– Supports auto-negotiation (10/100-Based full / half duplex)
– Does not support IP fragmentation
– 3.3V operating voltage, I / O port 5V voltage signal;
– LED status display (full / half duplex, network connection, network speed, active)
– 48-pin LQFP lead-free package (7x7mm, 0.5mm pitch)
| Module | Device | Description | Remarks |
| Core Board | TCP/IP Core | W5500 | Hardwired TCP/IP Software Stack |
| MCU | STM32F103RCT6 | ||
| EEPROM | AT24C16 | 4K E2C | |
| J1, J2 pin | external pin | 2.54mm 12*2 | |
| Connectors | Network Transformer | B-TRC1188NLE | |
| RJ-45 | MAG Jack | without transformer and LED | |
| Regulator | LM1117-3.3 | ||
| USB to RS232 chip | FT232RL | ||
| LED indicator | Link,ACT,Speed | ||
| J3,J4 pin | External pin | 2.54mm 12*2 | |
| P3 pin | J-Tag socket | 2.54mm 10*2 | |
| Button | Direct Push Button | 6 piece |
Bộ sản phẩm Ethernet W5500EVB-M3
01. Board W5500EVB-M3
02. USB Mini cable
03. Ethernet Cable
Tài liệu

Raspberry Pi 3 model B
STM32F429I-DISC1
STM32F4 DISCOVERY
Module LoRa LoRa610Pro Mesh DTX 3KM
Module LoRa6100II Mesh DTX 10KM 2W 433Khz
DTX BlackBoard IOT M95
USB to UART CP2102
DWM1000 adapter cho định vị vật thể 








Đánh giá
Chưa có đánh giá nào.