MIÊU TẢ BOARD LoRa6100II Mesh DTX 10KM 2W 433Khz
- LoRa6100II is a low-voltage, low price uart LoRa module. It adopts LLCC68 chip from Semtech, with built-in hardware anti-crash self-reset protection circuit and overcurrent and overvoltage reverse connection protection circuit to resist external strong interference signals.
- The LoRa6100II module is designed for 1W output power under the power supply of a single-cell lithium battery, and embedded small size design, which is widely used in wireless remote transmission control industries.
- LoRa6100II strictly uses lead-free process for production and testing, and meets RoHS and Reach standards.
- Note: The LoRa II series can be configured to be compatible with our previous uart LoRa modules.
Note: The module is internally regulated by 3.3V LDO. The CS pin and SET pin control are 3.3V levels. TXD and RXD are also 3.3V levels.
| Parameters | Min. | Typ. | Max. | Unit | Condition | 
| Working Condition | |||||
| Voltage range | 3.4 | 4.0 | 5.5 | V | |
| Operating Temperature | -40 | 25 | +85 | ℃ | |
| Current Consumption | |||||
| Rx current | <8 | mA | TTL level | ||
| Tx current | < 1300 | mA | @5v,33dBm, 433MHz | ||
| < 1000 | mA | @5v,31.5dBm, 915MHz | |||
| Sleep current | < 240 | uA | |||
| RF Parameters | |||||
| Frequency range | 414.92 | 433.92 | 453.92 | MHz | @433MHz | 
| 470.92 | 490.92 | 509.92 | MHz | @470MHz | |
| 849.92 | 868.92 | 888.92 | MHz | @868MHz | |
| 895.92 | 914.92 | 934.92 | MHz | @915MHz | |
| Data rate | 1312 | 62500 | bps | @LoRa | |
| Output power | 15 | +33 | dBm | Software level 7 adjustable | |
| 19 | 31.5 | dBm | |||
| Sensitivity | -129 | dBm | @1312bps | ||
ĐẶC TÍNH KỸ THUẬT BOARD LoRa6100II Mesh 2W
| Interface | TTL | 
| Network | MESH | 
| Frequency | 433MHz,470MHz,868MHz,915MHz | 
| Modulation | LoRa | 
| Output Power | 2W | 
- AES128 data encryption method
- No blind zone without distance limitation
- Single module open transmission distance of 12Km @ low rate
- Frequency band: 433/470/868/915 MHzfor option
- Up to 40 communication channels in the same frequency band
- Diversified serial port parameters
- Operating voltage range: 3.4~ 5.5 V
- LBT (Listen Before Talk) function optional
- Node/route/node+route optional in MESH mode
- Built-in hardware reset protection circuit
- LoRa modulation
- TTL interface
- Sensitivity up to -129 dBm@1.3Kbps
- Maximum output power: 2W (@5V)
- Operating temperature range: -40 ~ +85 °C


ỨNG DỤNG BOARD LoRa6100II MESH 2W
- Remote control
- Remote meter reading
- Industrial data collection
- Home automation telemetry
- Wireless data communication
- Access control system
TÀI LIỆU
01. Datasheet
DỊCH VỤ
- Tư vấn giải pháp điều khiển, giám sát trong công nghiệp.
  Thiết kế sản phẩm và chuyển giao công nghệ. 
- Thiết kế sản phẩm và chuyển giao công nghệ.
- Thiết kế sản phẩm và cung cấp linh kiện về RF, RFID, LoRaRF, GSM, GPS, 3G, LTE, 5G, NB IOT
THÔNG TIN LIÊN HỆ
- Zalo & Sdt: 0939 395 952
- Email: dientuxanhvn@gmail.com
- Website 01: www.dientuxanh.vn
- Website 02: https://www.dtxvn.com

 NX4832K035 - Màn hình 3.5 INCH TFT Nextion
NX4832K035 - Màn hình 3.5 INCH TFT Nextion						 NX8048K050 - Màn hình 5 INCH TFT Nextion
NX8048K050 - Màn hình 5 INCH TFT Nextion						 NX4827P043-011R - Màn hình 4.3 INCH TFT Nextion
NX4827P043-011R - Màn hình 4.3 INCH TFT Nextion						 Mạch nạp ST-Link V2
Mạch nạp ST-Link V2						







 
				







 
				 
				 
				 
				 
				 
				 
				 
				 
				 
				
Đánh giá
Chưa có đánh giá nào.